NetResults Tracker: Upgrade from Version 5.5.x (5.5

Upgrade from Version 5.5.x (5.5 - 5.5.4) to Version 6.6.0

Upgrade Steps

Please use the information below to upgrade from Version 5.5.x (5.5 to 5.5.4) to Version 6.6.0. These instructions can be used for a licensed copy of the software or for an evaluation copy.

Prior to installing the software, please make sure that you meet the Version 6.6.0 Requirements. The requirements have changed in 6.6.0.
Review the Upgrade Preparation section to find out how the upgrade will affect your Version 5.5.x data.
Review the Known Limitations (recently discovered issues) in the latest release. You may find an issue in there which is significant enough that you will want to wait until a fix is available in a patch or maintenance release (often available within a few days or weeks).
Upgrade your installation. This procedure assumes that you are installing NetResults Tracker Version 6.6.0 on the same machine where you have NetResults Tracker 5.5.x installed. If you are installing NetResults Tracker Version 6.6.0 on a different machine than where you have NetResults Tracker 5.5.x installed, please use the following Move and Upgrade KB article for instructions.

Upgrade Preparation

This section provides information about changes from version 5.5.x to 6.6.0 that you should be aware of before upgrading. While we have worked very hard to ensure that the upgrade is backward compatible in terms of end user interface, there are some differences which will be visible to end users. Also, with so many new features (especially multiple Projects, Forms, and Workflows), there are significant changes for administrators. For a full list of what's new (along with information on how to enable the new features), please browse to the Features and Fixes pages.

Note: The name of the product ProblemTracker has been changed to "NetResults Tracker".

Getting to Know Version 6.6.0

One of the best ways to learn about new features is to try them out yourself. To do this, you can install 6.6.0 on a test system (test system use limited to 15 days) and make use of the default workgroup (pteval) which is optionally installed. If you've installed on a test system, you can login to the pteval workgroup by selecting Start > Programs > NetResults Tracker > Evaluation Workgroup, and enter Admin as the User ID and password. This workgroup is configured with the template you selected during the installation setup program. The data in the workgroup is what you would get by using the Add operation in the Workgroup Management System. You can use this as a test bed when reviewing the features described below.

Another way to try out version 6.6.0 is to request a Personal Live Trial on our web site. Within one business day we will set up a workgroup exclusively for your use on one of our web servers. All you need is a web browser.

Administration Section Changes

Interfaces for adding and maintaining multiple Projects, Forms and Workflows within a single workgroup have been added. The new Projects, Forms, Fields and Workflows sections are where you will now find configuration for Fields, Workflow, Alerts and Email Rules. While you can still use the Workgroup Management System (WMS) to create separate workgroups for projects that are unrelated (or must remain physically independent), you now have the option to also create multiple projects within a single workgroup. Projects that are in the same workgroup can (optionally) share Forms and/or Workflows. And, reports can be created that span multiple Projects and/or multiple Forms with a workgroup.

Each Project makes use of one or more Forms (record types). For each Form within a Project, you can specify which Workflow (states, transitions, etc.) is used as well as which User Groups can access that Form in the Project. You can also specify the set of State Managers for each Form in the Project and (if you have the Submit via Email Add-On) rules for processing Incoming Emails for each Form in the Project. The Projects section is where you now configure State Managers and Incoming Email Settings (for those with Submit via Email) as well as Project & Form Visibility. Immediately after upgrade, you will have a single Project.

Each Form is composed of one or more Fields. A Form (record type) can be used in a single Project or shared across multiple Projects. A Field can be used in a single Form or can be shared across multiple Forms. The Forms section is where you Add, Edit, and Delete Forms and associate Forms with Fields. The Fields section is where you Add, Edit, and Delete "Global" Fields which can be associated with each Form. Immediately after upgrade all Fields will be associated with a single Form which represents your old Define Record configuration. The Fields section is also where you now manage Option Menu Items (including dependencies for option menu items) by clicking on the Items button for a Field.

Each Workflow is composed of States, Transitions between those States, Outgoing Email Rules (email notifications for when records change) and (if using Enterprise Edition) Alert Settings (email notifications for when records don't change by a particular date/time). A Workflow can be used for a single Form or shared across multiple Forms. Also, the same Form (for example Trouble Ticket) can be used in more than one Project with a different Workflow in each Project (Workflow is specified for each Form in each Project). States can be used in a single Workflow or shared across multiple Workflows. The Workflows section is where you now configure States, Transitions, Alerts, and Outgoing Email Rules. Immediately after upgrade you will have two workflows. One workflow which represents your previous workgroup Workflow and a new Workflow which can be used for new Forms that have no Workflow.

In your upgraded workgroup, the names given to the single Project, Form, and Workflow which you had prior to upgrade will be based on what template you selected when you first created your workgroup.

If the Product Development template (previously known as Software Development) was used, the Project is called "Product Development", the Form is called "Issue" and the Workflow is called "Product Issue Process".
For Web Site Development, the Project is called "Web Site Development", the Form is called "Issue" and the Workflow is called "Web Site Issue Process".
For Knowledge Base, the Project is called "Knowledge Base", the Form is called "Article" and the Workflow is called "KB Article Process".
For Help Desk, the Project is called "Help Desk", the Form is called "Ticket" and the Workflow is called "Help Desk Ticket Process".
For Support, the Project is called "Support", the Form is called "Ticket" and the Workflow is called "Support Ticket Process".

The Project, Form, and Workflow names will not be immediately visible to your end users. Workflow names are never visible outside of the Administration section. The Project and/or Form names are only visible when a user has access to more than one Project or Form. So until, you have (a) created a new Project or Form and (b) given a user access to more than one Project or Form, no end user will see Project or Form names. However, now is probably still a good time to review the names which were given to your one Project, Form and Workflow during upgrade and change them, if necessary, to something more appropriate to your current use. To update the name of a Project, login as Admin, click on the Admin icon, click on the Projects link, click on the Edit link to the right of the Project heading at the top of project tree structure. Update the Name of the project and click OK to save the change. To update the name of a Form, login as Admin and click on the Admin icon, click on the Forms link, click on the Edit button to the left of the form. Update the Name of the form and click OK to save the change. To update the name of a Workflow, login as Admin, click on the Admin icon, click on the Workflows link, click on the Edit button to the left of the Workflow. Update the Name of the Workflow and click OK to save the Change.

Saved Queries and Charts now have the upgraded Project and upgraded Form selected as part of the criteria so that existing reports will function as they did prior to the upgrade when you add new projects and forms to your workgroup. The system reports "Default [Users]", "Assigned To Me [Users]", "Reported By Me [Users]", "Added By Me [RestrictedUsers]" have "*" selected for Project and Form so that users will see records for all projects and forms to which they have access. For now, no one will see the Project or Form criteria (that is only visible when a user has access to more than one Project or Form).

If you wish to add more Projects, Forms and Workflows, please review the Getting Started with Tracker section of the Administrative Help Guide for more information about making use of these powerful new features. You may also wish to review the Projects, Forms, Fields, Customizing Menu Items, and Workflows sections.

Alerts

Alerts that are applied to newly added records can now be set differently based on the value of any one pulldown field. Previously they could only be set based on "Product" pulldown field. Alerts are now configured for each form in the Workflows section. After upgrading, the Alert settings for your form will be set with the "Based On" property set to "Product". If you renamed Product to be something else (e.g. Request Type, Customer, etc.), it will still be used as the "Based On" property for alerts. If the alert settings are the same for all values of the Product field, change the "Based On" property to "<None>". To check whether the alert settings are the same for all products, login as Admin, click on the Admin icon, click on the Workflows link, click on the Expand All link to the right of Forms. Though it is very unlikely that you will see this, it is possible that when you check the alert settings for all products the entry called "<Default>" will not be present. If this entry is not present under "Alerts", click on the "Manage" link to the right of Alerts, select "<Default>", make any adjustments to the alert settings, then click OK to return to the Workflow properties. Check to see whether the alert settings are set the same for all products. If they are not the same, no further action needs to be taken. If they are the same, you can simplify the alert settings by clicking on the Edit Based On link to the right of Alert. Set the Based On Pulldown field to "<None>" and click OK.

Branding

There are many new options to allow you to use names/titles that are more appropriate for your installation than NetResults Tracker (or ProblemTracker). Immediately after upgrade, references to ProblemTracker are replaced with NetResults Tracker and ProblemTracker logos are replaced with "powered by NetResults Tracker" links. However, you are now free to reconfigure most references to NetResults Tracker (other than the "powered by NetResults Tracker" links).

You may wish to reconfigure the web "Page Title" (which shows up at the top of the browser windows, or for tabbed browsers in the tab, and shows up in bookmarks/favorites). You can also reconfigure the Page Titles for the Submit Pages (Submit via Web for Unregistered Users), and the Knowledge Base pages (Search, Results, and Item).

The "Header Text" at the top of the login box and on the page for Self-registration can be customized.

All references to "ProblemTracker / NetResults Tracker" in Alert and Discussion notification emails are now configurable (they use the Page Title property referenced above).

You can also enter a custom Help link in General Preferences to change what is displayed when a user clicks on the Help icon in the Button Bar. This allows you to display your own Help documentation to guide your end users. A separate Help link can be entered for standard and restricted users.

Context-Sensitive Help

The context-sensitive Help links on every page in NetResults Tracker have been moved up to the Status bar (on the far right). You also now have the option to remove this entirely for select User Groups (if, for instance, you only want them browsing to your custom Help).

Email Notifications

Outgoing Email Rules can now be set differently based on the value of any one pulldown field. Previously they could only be set based on the Product pulldown field. Email Rules are now configured in the Workflows section (previously Email Rules were configured in the Email Configuration Admin section). After upgrading, your Outgoing Email Rules will be set with the "Based On" property set to "Product" (if you renamed Product to be something else (e.g. Request Type, Customer, etc.), it will still be used as the "Based On" property for email rules). If the email rules are the same for all values of the Product field, change the "Based On" property to " <None>". To check whether the email rules are the same for all products, login as Admin, click on the Admin icon, click on the Workflows link, click on the Expand All link to the right of Outgoing Email Rules. Check to see whether the email rules are set the same for all products. If they are not the same, no further action needs to be taken. If they are the same, you can simplify the email rules by clicking on the Edit Based On link to the right of Outgoing Email Rules. Set the Based On Pulldown field to "<None>" and click OK.

Previously, email notifications could not be sent to users without an account in NetResults Tracker. Email notifications can now be sent to end users without a NetResults Tracker user account who report issues via the Submit via Web Page (formerly known as the Inet Page) or using the Submit via Email feature. To do this, designate a Text field to be the Unregistered User Email by logging in as Admin, clicking on the Admin icon, clicking on the Fields link, clicking on the Edit button to the left of the Text field you wish to designate as the Unregistered User Email (or create a new field for this purpose), setting the Unregistered User Email property to Yes and clicking OK. The Text field you selected should have the Include in Submit Page option set to "Yes" so the field is displayed on the Inet Page for the user reporting the issue to enter his/her email address to receive notifications. Users can receive a confirmation when reporting an issue and/or on actions performed on the issue after it is added. Decide when these users should be notified by setting the Send Email Notifications On option in the General Preferences section. Then, update the appropriate Email Rules to select " <Unregistered User>" so the unregistered user will receive the email notifications.

Knowledge Base

Colors for dozens of user interface elements within the Knowledge Base are now configurable from the web interface (there is a new Color button for each option in the Knowledge Base Admin section). Previously this could only be done by editing a style sheet.

If you are using the Knowledge Base feature and have customized the style sheet to change the Knowledge Base color settings, please send a copy of your style sheet to NetResults Technical Support so that we can tell you which Color Preferences to use to produce your color scheme using the new Color settings within Tracker.

Login Page

Adding custom HTML to the top and bottom of the Login Page can now be done from the Login Options Admin section instead of modifying the logintop.inc and loginbottom.inc files. To move any custom HTML you have added to the Login Page, you will need to save a copy of the logintop.inc and loginbottom.inc files and keep them in a safe place before you upgrade to Version 6.6.0. To move the custom HTML: Login as Admin and click on the Admin icon. Click on the Login Options link. Copy the custom HTML added to the logintop.inc file and paste it into the field "Custom HTML (Top of Page)" field. Copy the custom HTML added to the loginbottom.inc file and paste it into the field "Custom HTML (Bottom of Page)" and click OK to save the changes.

Additional customization options are available for the Login Page such as setting the Header and Instruction text and customizing the color preferences.

Look and Feel Enhancements

Many enhancements have been added to allow the look and feel of NetResults Tracker to be customized. We will point out a few that you may wish to review immediately after upgrade.

The Color Preferences for your workgroup will be upgraded to use the "Version 6" theme (a set of pre-configured colors for the entire workgroup). If you wish to revert back to the color scheme you were using in the previous version, login as Admin, click on the Admin icon, click on the Color Preferences link, set the "Theme" option to "Version 5" and click OK.

If the Background Color for your Submit via Web Page is set to default (#C0C0C0), the Color Preferences for the Submit via Web page will be upgraded to use the "Version 6" colors. If you would like to revert back to the Version 5 color scheme, login as Admin, click on the Admin icon and click on the Submit Page Options link. In the General Color Settings section, set Page Background to "#C0C0C0", Page Text (Field Labels), Required Field Label Text and Input Text (Field Values) to "Black", Input Background to "White" and check the option "Use Default Buttons (& Inputs)" for IE Browser Button Settings and Other Browser Button Settings. If the Background Color for the Submit Page is not set to the default color and you would like to change the color scheme to match the Version 6 color scheme, login as Admin, click on the Admin icon and click on the Submit Page Options link. In the General Color Settings section, set Page Background to " <Custom> #FDFDFD", Page Text (Field Labels) to "<Custom> #0845C0", Required Field Label Text to "<Custom> #099801", Input Background to "White" and Input Text (Field Values) to "Black". For IE Browser Button Settings, uncheck the option for "Use Default Buttons (& Inputs)", set Gradient to "Bottom to Top", Background to "<Custom> #8CB0F8", Text to "<Custom> #212A39" and Border to "<Custom> #8CB0F8". For Other Browser Button Settings, check the box for the option "Use Default Buttons (& Inputs)".

Record Visibility

The Record Visibility options for records submitted by unregistered users (records added via the Submit Page or the Submit via Email feature) are now located in the Record Visibility section of the General Preferences page.

Each user group now has a Record Visibility privilege "Make Visible to Groups" to select which standard user groups should have visibility to the records added by the user group being modified. Each user group has this privilege configured to select its own user group by default. The General Preferences option "By Default Include 'Users' Group for Record Visibilty on Add Operation" has been removed. If needed, set the "Make Visible to Groups" privilege to grant the Users group visibility on records added by particular user groups. If you have Record Visibility enabled and Restricted Users, review the following Knowledge Base article for information on optimizing this configuration (this configuration is discussed in "Sample 2").

Reports

In previous versions, the list of Saved Queries on the Home and Query pages were sorted by Type (Standard or Advanced) first, then by User Group (with personal reports first), then by Name. Saved Queries are no longer divided up into Standard or Advanced (that is now just a property of the report that is visible when creating or adding the report). So, Saved Queries are now only sorted by User Group and Name. Saved Charts (Metrics) continue to be sorted by User Group and Name as well. For backward compatibility, reports (both Saved Queries and Saved Charts) are still sorted by User Group first and Name second. However, you may wish to change your system to sort reports by Name first and User Group second (User Group would then only be used if two reports have the exact same Name). Though this would be a change from previous versions, it may better meet the expectations of your end users. A general preference to choose how report names are sorted in the report pulldowns on the Home, Query, Metrics and Preferences pages is available. This affects the sorting for all users in the workgroup.

Restricted Users

The privileges available to Restricted Users has been expanded to include ability to edit fields and attachments for records in particular states, task records, and participate in discussions. Immediately after upgrade, Restricted Users will have the same privileges they did before upgrade. You may wish to consider expanding their privileges

Submit via Web for Unregistered Users

The Inet Page is now called Submit via Web for Unregistered Users or simply the Submit Page.

Previously, only the top, bottom and background of the Submit Page could be customized. Now, virtually all aspects of the Submit Page can be customized such as the date settings, page header, page title, submit button label and action, confirmation page message and confirmation page button action, among others. These options allow the Submit Page to be more seamlessly integrated with your web site. More information can be found in the Submit Page Help section.

Users and User Management

Global user operations (adding, editing and deleting user accounts, giving users access to workgroups) have been moved from the Workgroup Management System (WMS) to a new interface called the User Management System (UMS). UMS also includes a search operation to quickly find users by name, workgroup, license type or other profile information.

You can now delegate the Add and Delete user options to local Workgroup Administrators who can use the User Accounts section to Add or Delete users by changing the settings of the UMS Administrative Options. To enable these options, login to the User Management System (UMS), click on the Admin icon, select the option "Set User Account Options", click Continue, set the options as desired and click Update to save the changes.

User group privileges are now classified as "global" or "non-global" privileges. Non-global privileges are privileges that are applied based on the Projects and Forms to which a user group has access. Meaning, that users will only be able to utilize the privileges they are granted for the Projects and Forms to which they have access. Global privileges are privileges that are applied irrespective of the Projects and Forms that are visible to a user group. In an upgraded workgroup, all user groups will have access to the Project and Form in your workgroup and user group privileges will be applied as in previous versions. If you change which user groups have access to the Project and Form, please review the information in the User Group Privileges section to understand how the Project and Form visibility will affect a user group's privileges.

Previously, the option for enabling the Self Registration option could be found in the General Preferences section and the options for customizing this feature could be found in the User Administration section. All Self Registration options have been moved to the Login Options Admin section.

In previous versions, the user name "Internet User" was listed as the Reporter for records that were added by an anonymous user via the Submit via Web page or the Submit via Email features. This user has been renamed to "Unregistered User". If you still display User ID in reports, Inet will continue to be displayed (the User ID remains the same for backward compatibility even though the Full Name associated with the User ID has changed).

An option has been added to enable or disable the User Type property for user accounts. On upgrade, this option is enabled to allow the use of the User Type property. The User Type property allows a non-Restricted user to be marked as "External" for the purpose of excluding that user from the Assigned To list on the Add page. However, the same effect of excluding a user from the Assigned To list on the Add or Edit pages can be achieved by using the Can Be Assignee for Add and Can Be Assignee for Edit user group privileges. The User Type property has been deprecated and will be removed in a future release. It is recommended that you configure your user group privileges to deny the Can be Assignee for Add and/or Can Be Assignee for Edit to any user groups that should not be listed in the Assigned To field on the Add or Edit pages. This will prepare your system for the removal of the User Type property in a future release.

Any user accounts that contain the following characters in the First Name or Last Name of the user's profile information will be replaced with an alternate character during the upgrade process: " (double quote), \ (back slash) or ~ (tilde). " (double quote) will be replaced with ' (single quote), \ (back slash) will be replaced with / (forward slash), and ~ (tilde) will be replaced with - (hyphen).

Performance

For optimal performance, it is required that 127.0.0.1 or localhost be entered as the SMTP Mail Server in the Outgoing Mail Server Configuration. This allows the email notifications generated by NetResults Tracker to be processed as quickly as possible using a fast connection to a local mail server dedicated to Tracker. That mail server can then forward the emails on to their destination "in the background". This can provide significantly improved performance for operations in NetResults Tracker that generate email notification messages such as Add, Task, and Edit. Significant performance issues can be caused by use of a "remote" mail server which is heavily loaded with antivirus and spam filtering tasks. If your mail server is not located on the same machine as NetResults Tracker, please set up the SMTP Mail Server that is included with Internet Information Server and have this server forward the email to your current (remote) mail server "in the background". Please do not make your users wait for your mail server to process all outgoing emails in order to complete each Add, Edit, Task, or Delete operation they perform. Instead, follow our best practices and use a local (possibly "intermediate") mail server to store and forward the emails which are generated by Tracker operations.

Upgrade Instructions

Login to the web server machine as a local Administrator.
If you have not already done so, please apply the Daylight Savings Time Patch to your installation before proceeding. If you are not sure whether the patch has been applied to your installation, use Windows Explorer to go to /pttemplate/Include where is the location of your ProblemTracker installation files. By default this is C:\Inetpub\wwwroot\ProblemTracker. Inside the Include folder, right click on the file called PTTimeZone.inc. On the General tab, check the date and time the file was modified. If it is February 22, 2007 8:30:46pm Pacific time or later, then the patch has been applied to your installation. Failure to apply the Daylight Savings Time patch before you upgrade could result in dates in your data between March 11, 2007 and April 1, 2007 being off by 1 hour after upgrade.
Prior to installing NetResults Tracker Version 6.6.0, block all of your workgroups via the Workgroup Management System (WMS) while you perform the upgrade. To end any active sessions and block a workgroup:
1. Login to WMS and click on the Admin icon
2. Select the option Block / Unblock Workgroups, then click on the Continue button
3. Check the box in the upper left corner of the workgroups list to select all workgroups, then click on the Block button. If the select all checkbox is not available in your version, select a workgroup, then click on the Block button. Repeat this to block each workgroup.
BACKUP ALL OF YOUR NetResults Tracker DATABASES AND ATTACHMENT FILES BEFORE PROCEEDING. Instructions for backing up your installation can be found here. It is REQUIRED that you either copy the database file(s) and attachment files to a safe place (Access only) or perform a backup (Access, SQL Server or Oracle). UNDER NO CIRCUMSTANCES IS NETRESULTS RESPONSIBLE FOR THE LOSS OF ANY DATA AS THE RESULT OF THE UPGRADE PROCESS.
Temporarily disable any anti-virus software. This is recommended so that your anti-virus software does not prevent the installation program or the Workgroup Management System (WMS) from performing operations such as copying files, running scripts, configuring your web server, setting file permissions and registry entries. Your anti-virus software can be reactivated safely after you have completed the installation steps and any necessary WMS configuration.
Run the installation setup program (double-click from Windows Explorer): nrtse660.exe (NetResults Tracker Standard Edition 6.6.0) or nrtee660.exe (NetResults Tracker Enterprise Edition 6.6.0).

The installation program will stop and restart the IIS web server as part of the installation.

You will be prompted about the new interface called the User Management System (UMS). You will be prompted to choose whether you wish to use the default password to access UMS or whether you would like to set a new password. Click Next if you wish to use the default password (If you choose this option, you will use "useradmin" as both the User ID and password to access UMS. You can change the password after logging into UMS for the first time.). Or, you can change the default password by entering and confirming the new password you wish to use before clicking Next to proceed.

You will be given the option to enter your new Version 6 license keys during the installation. You will need to enter these keys before using NetResults Tracker.
When the installation setup program has finished, you will be asked to reboot your system. You must reboot your system before proceeding to the next step.
If you did not enter your Version 6 license keys during the installation process, enter your Version 6 license key(s) now by going to Start > Programs > NetResults Tracker > License Manager.
Login to the Workgroup Management System (WMS) by going to Start > Programs> NetResults Tracker > Workgroup Management System. Click on the Admin icon on the Button bar.
Select the option "Upgrade workgroups from versions 4.x / 5.x / 6.x to NetResults Tracker 6.6.0", then click on the Continue button. A list of workgroups that need to be upgraded to 6.6.0 will be displayed in a pulldown. Select a workgroup to be upgraded, click on the Upgrade Workgroup button, then click OK to confirm. Once the workgroup is updated, you will be prompted to click on the Continue button to upgrade the data for the workgroup. A confirmation page will be displayed. Click on the Upgrade Data button to proceed, click OK to confirm. Click OK when it is finished to return to the Administration Menu. Repeat this step for each workgroup.
Re-activate your anti-virus software.
If you are using Alerts, you will need to update the path for the Scheduled Task which you have configured to run for this feature. To do this, go to Start > Control Panel > Scheduled Tasks and select the scheduled task that is used with the Alerts feature. Right click on the task and select Properties. On the Task tab, the Run field will have "CScript.exe "<PTAlerts.jse file path>" //B //H:CScript" where <PTAlerts.jse file path> is C:\Program Files\NetResults\ProblemTracker5 by default. Change "<PTAlerts.jse file path>" to be the new program files path, which is C:\Program Files\NetResults\Tracker\PTAlerts.jse. Also, change the "Start In" field to reflect the location of the Program Files folder (C:\Program Files\NetResults\Tracker).
If you are using Submit via Email, you will need to update the path for the Scheduled Task which you have configured to run for this feature. To do this, go to Start > Control Panel > Scheduled Tasks and select the scheduled task that is used with the Submit via Email feature. Right click on the task and select Properties. On the Task tab, the Run field will have "CScript.exe "<PTEmails.jse file path>" //B //H:CScript" where <PTEmails.jse file path> is C:\Program Files\NetResults\ProblemTracker5 by default. Change "<PTEmails.jse file path>" to be the new program files path, which is C:\Program Files\NetResults\Tracker\PTEmails.jse. Also, change the "Start In" field to reflect the location of the Program Files folder (C:\Program Files\NetResults\Tracker).
As of Version 6.6.0, adding custom HTML to the top and bottom of the Login Page can now be done from the Login Options Admin section instead of modifying the logintop.inc and loginbottom.inc files. To move the custom HTML: Login as Admin and click on the Admin icon. Click on the Login Options link. Copy the custom HTML added to the logintop.inc file and paste it into the field "Custom HTML (Top of Page)" field. Copy the custom HTML added to the loginbottom.inc file and paste it into the field "Custom HTML (Bottom of Page)" and click OK to save the changes.
If Tracker is installed on a Windows Server 2003 server, please perform the steps in this Knowledge Base article to disable the recycling of the application pool for your workgroup. Failure to perform these steps will result in user sessions being terminated unexpectedly.

Your system has now been upgraded to Version 6.6.0 for all workgroups.

NetResults

Tracker

Product